T-Pure (3) Bank Water Filtration System
The SolaraPure / Tyent 3-bank, in line fluoride water removal system contains 100% activated alumina and will reduce levels of fluoride and arsenic found in many municipal water sources by up to 95%.
If you are on city water then this is the perfect addition to ensure that you and your family have access to safe and healthier drinking water. In addition, it is compatible with all of Tyent Alkaline Water Ionizer systems.
Note: This is for the complete housing assembly & filters. Replacement filters can be found here.
SolaraPure / Tyent T-Pure (3) Bank Water Filtration System
**Note:** This is for the complete system which includes the filter housing unit, install materials as well as the initial filters. This is a one time purchase and you will only have to change out the filters every 12 months or so. Replacement filters for this unit can be found here.
STAGE 1 FILTRATION:
1-micron carbon block: for taste and odor removal as well as heavy sediment removal for clear turbidity-free water with a very pleasant taste.
STAGE 2 FILTRATION:
100% ACTIVATED ALUMINA: UP TO 95% REDUCTION OF FLUORIDE AND ARSENIC.
Activated Alumina is made from Aluminium Hydroxide by de-hydroxylating it to produce a highly porous material; this material can have a surface area significantly over 200 m²/per gram (2,152 square feet/per gram). This very high surface-area-to-weight ratio gives it many “tunnel-like” pores for capturing (filtering) Fluoride, Arsenic and other toxins in drinking water.
It is made of Aluminium Oxide (alumina; Al2O3), the same chemical substance as RUBIES & SAPPHIRES (but without impurities that give those gems their color). Activated alumina has also been identified by the EPA as a Small System Compliance Technology (SSCT) for uranium, and can remove up to 99 percent of the contaminant, depending on pH and concentrations of competing ions. It is also effective at removing other ions such as arsenic, fluoride, sulfate, and selenate.
STAGE 3 FILTRATION:
kdf55 combined with catalytic carbon for reduction of the following: • kdf55: removes heavy metals such as (lead, mercury, nickel), chlorine, acts as a bacteria and scale control media. • catalytic carbon: removes iron, hydrogen sulfide, manganese, chloramines.
Important installation details:
Dimensions: 15″ length x 12″ high x 5″ wide
water flow through filter = stage 1 in & stage 3 out
flush with 4 gallons of water before using
Installation Video 2 & 3-BANK-FLUORIDE PRE-FILTER SYSTEM
**IMPORTANT** – FLUSH WITH 4 GALLONS OF WATER BEFORE CONNECTING TO IONIZER TO
REMOVE ANY LOOSE RESIDUE OR PARTICLES FROM THE FILTERS.
**The replacement filter cartridges have a limited service life of approximately 12 months (1,920 gallons). Be sure to change the filters annually, or if you notice changes in taste, color or flow of the water being filtered.
|Dimensions||13 × 13 × 13 in|
Only logged in customers who have purchased this product may leave a review.